Alberg 37 International Owners Association Discussion Forum

[ Contents | Search | Post | Reply | Next | Previous | Up ]

Re: Autopilots

Name: Bob Prescott
Category: General/Other
Date: 12 Jul 2004
Time: 09:07:42
Remote Name:
Remote User: bob_prescott


I have the ComNav 1420 that was installed by previous owners. Now it is great, but not until the loose solder joint on the fuse panel was fixed. It seems to be quite capable but I haven't learnded how to use it beating or when flying the asymetric spinnaker. I have spent no time learning to tune the control. The linear actuator is mounted in a wooden box under the port locker and the control unit is located on the forward bulkhead of the same locker. The hydraulic actuator has been ignored and trouble free for three years now.

Last changed: July 25, 2016