Alberg 37 International Owners Association Discussion Forum

[ Contents | Search | Post | Reply | Next | Previous | Up ]

Re: Interior Finish

Name: Lou
Category: General/Other
Date: 10 Jul 2004
Time: 07:53:05
Remote Name:
Remote User: pika


Joran, a number of years ago we cleaned and refinished the interior from the mast aft on Pika, our 1967 MkI. We used a "deck" cleaned which worked well removing the old oil but was hard to rinse off. We then applied Z-Spar water borne Captains polyurethane varnish. The results were less than satisfactory. There appeared a white residue in the grain. Don't know the cause as some areas were fine. Most of this I have removed and refinished with ZAR exterior satin polyurethane which is my old standby for wood working projects. This turned out fine but is just a little "flatter" than I would like. When I get around to it I will over coat with a 50:50 mix of satin and gloss.

Last changed: July 25, 2016