Alberg 37 International Owners Association Discussion Forum

[ Contents | Search | Post | Reply | Next | Previous | Up ]


Marine Grade wire source

Name: Tom McMaster
EmailAddress: mcmaster.tom.c@usfamily.net
Category: General/Other
Date: 29 Apr 2004
Time: 22:06:42
Remote Name: 64.212.140.5
Remote User: sojourn

Comments

I thought people might want to know of a source of marine grade, tinned wire that is considerably less expensive than the Anchor brand. You can find it here : http://blackav.com/bai.php?page=11 Also Tom Assenmacher, I sent an e-mail to you but maybe your spam filter kicked it out. Perhaps you could e-mail me with the answers to below questions: a quick question or two: I am assuming you used silicon bronze machine screws, perhaps 1/4 x 20 x 3/4 long to attach the zincs to the rudder shoe, gudgeon, etc? The zinc protecting the bolts for the cutless housing stern tube by the looks of the photo is attached into the hull. Is this fiberglass and if so how deep did you drill and tap into it? Thanks, Tom


Last changed: July 25, 2016